GIS area explorer

Pick an area of Bangladesh, or draw or upload your own. See its boundary and size, how high the land is, and the modelled air pollution there. Download the boundary for QGIS or Google Earth.

Choose an area

    Map layers

    Click the map (outside drawing) to read the height at that point.

    Move over the map to read coordinates
    GIS area report – Your Study Material

    Results

    Boundary
    Area
    Perimeter
    Centre
    Boundary points
    Topography

    Air pollution now (model)
    MeasureMeanMinMax

    Past 7 days at the area’s centre (US AQI)

    How this works, and its limits

    1. Boundaries come from OpenStreetMap (searched through Nominatim) or from what you draw or upload. Named areas can differ slightly from official survey boundaries.
    2. Area and perimeter are calculated on the globe from the boundary shape, in your browser.
    3. Elevation is read from a global digital elevation model (about 90 m grid, through Open-Meteo) at sample points inside the area. Minimum and maximum are therefore approximate. Much of Bangladesh is very flat, so differences are small.
    4. Pollution is a modelled estimate (Copernicus CAMS through Open-Meteo), not a ground measurement. The model grid is coarse, roughly tens of kilometres, so small areas often show nearly the same value everywhere. Use it for a regional picture, and use satellite or monitor data for local detail.
    5. Your drawn or uploaded shapes stay in your browser. Only the sample coordinates are sent to the data services.

    Credits: map data © OpenStreetMap contributors; OpenTopoMap; Esri imagery and hillshade; elevation and air quality by Open-Meteo.com (CC BY 4.0), CAMS.